Features
7" multi-point capacitive touch screen, 3D waterfall spectrum diagram
Dynamic display of dashboard interface
A+B or A&B dual channel hybrid stereo
Bandwidth adjustable: 0Hz - 2700Hz for HPF and 100Hz - 20kHz for LPF
Built-in KSV/ power meter (KV)
Automatic and manual notch filters
Frequency band chart for automatic mode switching
Digital Noise Reduction (DNR), Pulse noise reduction (NB)
CAT virtual COM port (simulating FT-450 and TS-2000), CW port
Spectrum analysis, SWR antenna standing-wave analysis
SSB/FM Scanning mode
Digital Recording
WiFi networking operation
Firmware upgrade through USB, SD and WiFi
Built-in WIFI!Online radio is displayed after networking
Built-in CW decode, FT8 encode and decode (No additional device required)
Built-in TF card!Multiple recordings and playback! Recording call, CW mode with 5 recordings
TF card flash upgrade!
Multi scene mode selection! Fully open source software and hardware can be modified as per needed
Built-in USB sound card for easy connection
All aluminum anodizing housing! Precision design and production!
Built-in antenna tuner
Low Noise Amplifier LNA
Band-pass Filter
Specifications
RX Frequency: 0.5~750MHz
TX Frequency: 0.5~30MHz (TX on amateur band only); 144~148MHz
Operating Voltage: DC13.8V±15%
Display Screen: 7" color LCD display screen
Antenna Impedance: 50Ω, SL16 socket, two antenna input options
TX Power: ≤100W (HF), ≤60W (VHF)
Receiving Sensitivity: -110dBm @12dB SNAD
Main Reference Frequency: 122.88MHz
Modulation Type: CW, LSB, USB, AM, NFM, WFM, DIGI
Number of Memory Channels: 36
Adjustable Attenuator: 0~31dB
TX Current: ≤20A
Current: ≤1.5A (Speaker ON)
Operating Temperature: -20℃~+60℃
Storage Temperature: -40℃~+85℃
Dimensions (W×H×D): 340mm×155mm×211mm
Weight (Hand MIC Included): 4020
DC Power Cable
Hand Microphone